- Rugged construction
- 6000 meter
- Absolute position sensor
- RS485 or RS232 interface
- No rotating connector
- Precision gear
- External compensato
The Actuade SPA-145 with its special design is made for continuous and hard use down to 6000 meter.
The rugged design make it possible to use the unit close to thrusters on the ROV’s.
The unit must be connected to an external compensator solution.
Wide range of connectors and compensator solutions are available.
|Input Voltage||24 VDC|
|Drive Current||Up to 2.2 A|
|Communication||RS-485 or RS-232|
|Angular Limits||Pan range: ± 170°|
|Angular Speed||Up to 20 deg/sec|
|Torque in Air
||45 Nm (33 lb/ft) up to 20 deg/sec
or 60 Nm (44 lb/ft) < 15 deg/sec
or 75 Nm (55 lb/ft) < 8 deg/sec
|Max Payload in Air||100 kg (220 lbs) (Attached device weight)|
|Position Feedback||12 bit resolution absolute (approx. 0.1°)|
|Backlash||< 3 arc minutes (approx. 0.05°)|
|Operating Depth||Down to 6000 m (20,000 ft)|
||-20°C to + 50°C (-4°F to +122°F) operating
-30°C to + 60°C (-22°F to +140°F) storage
||166 x 114 mm (Flange Ø147 mm)
6.56 x 4.49 inch (Flange Ø5.79 inch)
||Hard anodized Aluminum
Stainless Steel or Titanium on request
|Weight in Air||8.1 kg (17.8 lbs)|
|Weight in Water||4.7 kg (10.4 lbs)|
All technical data and speci cations are subject to change